Try Claude
Academic ResearchSearch papers, authors, citations
AI Tools for Fire Protection Engineers
AI tools that help fire protection engineers research building and fire codes, look up material flammability data, find government contracts, generate fire suppression system diagrams, and stay current with NFPA standards.
Get started for free
Works in Chat, Cowork and Code
Commodity Class
Class IV — ESFR or in-rack required
Min Design Density
0.30 gpm/ft² over 3,000 ft² (OH-2 equiv.)
K-Factor Requirement
K-25 ESFR at 50 psi for rack storage >25 ft
Flue Space
6-inch longitudinal flue required for in-rack
Water Supply
Hydraulic calc required — fire pump likely needed
Fire code and NFPA standards research
Research current IBC, NFPA, and local fire code requirements for any building type. Synthesize requirements across sprinkler design, alarm systems, suppression agents, egress, and special hazards without manually reviewing hundreds of pages of code.
Summarize NFPA 72 requirements for automatic fire alarm system design in a mixed-use residential and retail building — detector types, spacing, notification appliance coverage, and monitoring requirements.
Summary: NFPA 72 (2022). Smoke detector spacing: 30-ft radius or per listing. Residential: single-station combination smoke/CO alarms required per unit. Notification: minimum 75 dBA at sleeping areas. Central station monitoring required for systems serving 100+ units. Heat detectors required in cooking areas and garages where smoke detectors prohibited.
ToolRouter research
Smoke Detector Spacing
30-ft radius or per listing
Residential Units
Single-station combo smoke/CO per unit
Notification Level
Min 75 dBA at all sleeping areas
Central Monitoring
Required for systems serving 100+ units
Cooking/Garage Areas
Heat detectors required — no smoke detectors
Flammable and hazardous material lookup
Retrieve flash points, autoignition temperatures, LEL/UEL limits, GHS fire classifications, and NFPA 704 hazard ratings for any chemical. Essential for special hazard fire suppression design.
Get the fire hazard properties of acetone — flash point, autoignition temperature, LEL/UEL, NFPA 704 health/fire/reactivity ratings, and IFC/IBC hazard classification.
Acetone fire data: flash point -20°C (−4°F), autoignition 465°C. LEL 2.5%, UEL 12.8%. NFPA 704: Health 1, Flammability 3, Reactivity 0. IBC/IFC: Class IB Flammable Liquid. Maximum exempt quantity per IFC: 30 gal in unsprinklered occupancy, 120 gal sprinklered.
ToolRouter get_compound
Flash Point
-20°C (−4°F) — Class IB Flammable Liquid
Autoignition Temp
465°C
LEL / UEL
2.5% / 12.8%
NFPA 704
Health 1, Flammability 3, Reactivity 0
Exempt Quantity (IFC)
30 gal unsprinklered, 120 gal sprinklered
Fire suppression system diagrams
Generate system layout schematics, riser diagrams, and sequence of operations diagrams for fire sprinkler, clean agent, gaseous suppression, and water mist systems.
Draw a schematic of a pre-action dry pipe sprinkler system: water supply → backflow preventer → fire pump → pre-action valve → dry pipe with supervisory air → sprinkler heads. Show the detector cross-zone interlock.
System schematic rendered. Shows double-interlock pre-action configuration with cross-zone smoke detectors and heat detectors. Valve sequence labeled: alarm panel → electric actuator → pre-action valve opens → system fills. Supervisory pressure alarm loop included.
Research and performance-based fire engineering
Find peer-reviewed fire engineering research for performance-based design justifications. Access fire dynamics studies, egress modeling data, smoke movement research, and suppression effectiveness data.
Find papers on smoke management in atrium buildings using computational fluid dynamics (CFD) — validated FDS models, design fire scenarios, and tenable conditions criteria.
Found 14 papers. Key reference: NIST-validated FDS atrium smoke study (2022, widely cited for performance-based designs). Critical parameter: design fire HRR selection has more influence on smoke layer height than exhaust rate in most atrium geometries. 3 papers on uncertainty quantification for CFD-based designs.
ToolRouter search_papers
Top Reference
NIST-validated FDS atrium study (2022)
Key Finding
Design fire HRR dominates smoke layer height
Uncertainty Papers
3 papers on CFD quantification for PBD
Tenable Criterion
Smoke layer ≥2 m above highest occupancy
Government fire safety contracts
Find federal, state, and municipal government contracts for fire protection engineering design, inspection, testing, and maintenance services. Identify new project opportunities for your firm.
Find open US federal contracts for fire alarm testing, inspection, and maintenance at federal facilities — GSA, military bases, and VA hospitals.
Found 9 active solicitations. Largest: VA hospital IDIQ for life safety systems inspection across 12 facilities ($3.8M). 2 GSA contracts for federal office building fire suppression upgrades. 1 DoD set-aside for small business fire alarm installation at Fort Bragg expansion.
ToolRouter search_contracts
AgencyDescriptionValue
VA HospitalsLife safety inspection — 12 facilities$3.8M
GSAFederal office suppression upgrades (×2)$1.2M
DoDFire alarm install, Fort Bragg expansion$840K
9 active · NAICS 541330, 238290
Ready-to-use prompts
NFPA sprinkler code research
Research NFPA 13 density/area design method for an ordinary hazard Group 2 occupancy with a fully sprinklered floor area of 25,000 sq ft. Include minimum design density and remote area requirements.
Chemical fire hazard data
Retrieve fire hazard properties for hydrogen peroxide (35% concentration) — flash point, stability, GHS oxidizer classification, NFPA 704 rating, and special extinguishing considerations.
Draw riser diagram
Generate a fire sprinkler system riser diagram showing: city water → check valve → PIV → FDC → backflow preventer → flow switch → zone control valve → sprinkler branch lines.
Clean agent research
Compare FM-200 and Novec 1230 clean agent fire suppression systems for a computer room application — NOAEL concentration, minimum design concentration, GWP, atmospheric lifetime, and cost comparison.
Fire research literature
Find peer-reviewed papers on fire spread and suppression effectiveness in lithium-ion battery energy storage systems (BESS). Focus on Class D fire behavior and water vs. alternative suppression agents.
Federal fire contracts
Search for US Army and Air Force contracts for fire protection engineering design services and fire suppression system installation on military installations. Show NAICS codes and set-aside status.
Egress and life safety research
Research IBC Chapter 10 occupant load calculations and means of egress requirements for an assembly occupancy with a 3,000-person capacity — exit width, travel distance, and discharge requirements.
Fire protection engineer jobs
Find fire protection engineer positions at engineering consulting firms and AHJs. Filter for roles requiring SFPE membership or PE license in fire protection. Include both design and code compliance roles.
Tools to power your best work
Deep ResearchAI research reports with citations
Contract OpportunitiesSearch public tenders and award history
Diagram GeneratorRender Mermaid, PlantUML & more
Job SearchJobs & salary data worldwide
Chemistry LookupCompounds, elements, and safety
Company LookupCompany data for UK, US & EU
165+ tools.
One conversation.
Everything fire protection engineers need from AI, connected to the assistant you already use. No extra apps, no switching tabs.
Special hazard suppression system design research
Compile all the technical and regulatory information needed to design a special hazard suppression system.
Performance-based design justification
Build the technical foundation for a performance-based fire engineering alternative to prescriptive code compliance.
Business development contract pipeline
Identify and track government fire protection engineering contract opportunities.
Frequently Asked Questions
Does Deep Research have access to NFPA code text directly?
Deep Research synthesizes from publicly available sources including NFPA public education content, code commentaries, and engineering references. NFPA code documents are proprietary — for code compliance work, verify requirements against your licensed NFPA code edition. The tool is effective for summaries, comparisons, and navigating complex multi-code requirements.
Can Chemistry Lookup provide NFPA 704 hazard diamond ratings?
Yes. Chemistry Lookup includes NFPA 704 health, flammability, and reactivity ratings alongside GHS classifications, flash points, autoignition temperatures, and exposure limits for thousands of chemical compounds.
Is Diagram Generator suitable for fire protection drawing submittals?
Diagram Generator produces schematics useful for planning documents, code submissions outlines, and client presentations — not stamped engineering drawings. For permit-required sprinkler or alarm drawings, use AutoCAD or SprinkCAD with a licensed PE stamp.
Can these tools help with wildland-urban interface (WUI) fire design?
Deep Research can summarize WUI code requirements (Chapter 7A in California Building Code, IBCWUI provisions) and research defensible space requirements. Academic Research finds fire behavior research for WUI zones. For specific site fire hazard assessments, supplement with local fire authority consultation.
How is Contract Opportunities useful for a small fire protection engineering firm?
Contract Opportunities surfaces both large prime contracts and small business set-asides. Many federal fire protection contracts are specifically set aside for small businesses under NAICS codes 541330 (engineering) and 238290 (fire suppression installation). The tool helps identify teaming opportunities where a small firm could partner with a larger prime.
Give your AI superpowers.
Get started for free
Works in Chat, Cowork and Code