Try Claude
Lead FinderFind & enrich companies and people
AI Tools for Environmental Consultants
AI tools that help environmental consultants research regulations, model energy and emissions data, analyze site conditions, and prepare comprehensive environmental assessments.
Get started for free
Works in Chat, Cowork and Code
Lead Program
NJ DTSC Site Mitigation Program
PCE Groundwater Threshold
DTSC enrollment required above 5 mcg/L
ASTM E1903-19 Scope
Min. 4 soil + groundwater sampling locations
PCE Cleanup Goal
0.006 mcg/L (drinking water standard)
State Oversight
Required if residential use is planned
Environmental regulation research
Compile up-to-date regulatory requirements for environmental permits, remediation standards, and compliance obligations at federal, state, and local levels. Produce research briefs that inform phase I/II ESA scoping and permit applications.
Research the current regulatory requirements for a Phase II Environmental Site Assessment at a former dry-cleaning facility in California. Include state DTSC requirements, ASTM E1903 standards, and cleanup levels for perchloroethylene (PCE).
Compiled regulatory brief. California DTSC requires Site Mitigation Program enrollment for PCE above 5 mcg/L in groundwater. ASTM E1903-19 scope must include soil and groundwater sampling at minimum 4 locations. Cal/EPA PCE cleanup goal: 0.006 mcg/L (drinking water standard). State oversight required if residential use is planned.
ToolRouter research
DTSC Enrollment
Required if PCE > 5 mcg/L in groundwater
Sampling Scope
Min. 4 locations per ASTM E1903-19
PCE Cleanup Goal
0.006 mcg/L (CA drinking water standard)
State Oversight
Required for residential use pathway
Air quality monitoring and site assessment
Pull real-time and historical air quality data for any project site. Assess ambient conditions, pollutant levels, and allergen data to support environmental health risk assessments and permit applications.
Get current air quality data for the area around a proposed industrial facility site at the coordinates 33.4484°N, 112.0740°W. Include AQI, PM2.5, PM10, NOx, and ozone levels.
Current AQI: 52 (Moderate). PM2.5: 8.4 μg/m³ (below 24-hr standard of 35 μg/m³). PM10: 21 μg/m³. NO2: 18 ppb. Ozone: 44 ppb. Site is within Phoenix non-attainment area for PM2.5 — requires air quality impact analysis for new stationary sources.
ToolRouter get_air_quality
AQI
52 (Moderate)
PM2.5
8.4 μg/m³ — below 24-hr NAAQS of 35 μg/m³
PM10
21 μg/m³
NO2
18 ppb
Non-attainment Status
Phoenix PM2.5 non-attainment area — air quality analysis required
Energy and renewables feasibility analysis
Model solar irradiance, energy production estimates, and electricity pricing for sites under consideration for renewable energy development or energy efficiency programs. Support environmental impact assessments for energy projects.
Calculate the solar energy potential for a 100-acre brownfield redevelopment in Nevada. Estimate annual generation, capacity factor, and CO2 offset versus grid average.
Site analysis: avg solar irradiance 5.8 kWh/m²/day (excellent). 100-acre solar array: estimated 35 MW capacity, 73,000 MWh/year at 24% capacity factor. CO2 offset: ~28,500 tonnes/year vs Nevada grid average (0.39 kg CO2/kWh). Qualifies for federal Investment Tax Credit under current IRA provisions.
ToolRouter get_solar
Monthly Generation (MWh)
Site satellite imagery and land change analysis
Obtain high-resolution satellite imagery of project sites to document existing conditions, assess vegetation cover, identify potential wetland boundaries, and compare historical and current land use.
Get satellite imagery for a 200-acre former industrial site in Gary, Indiana. I need current imagery to assess vegetation coverage, surface water features, and visible infrastructure for a Phase I ESA.
Retrieved high-resolution imagery (0.5m resolution) dated March 2025. Identified: 3 structures (2 demolition-grade), 1 surface water feature (potential wetland, ~4 acres), sparse vegetation coverage consistent with prior industrial disturbance, no active remediation visible. Imagery exported for Phase I report appendix.
Geohazard and seismic risk research
Research geological hazards, earthquake history, and fault proximity for project sites. Support environmental geotechnical assessments and regulatory disclosure requirements.
Research seismic activity and earthquake history within 50 miles of Sacramento, California. I need this for a geotechnical hazard assessment for a new industrial facility permit application.
Found 23 seismic events within 50 miles in the last 10 years. Largest: M4.2 in 2022 (Orinda fault). Site is within 8 miles of the Midlands fault. California Seismic Hazard Zone mapping shows the site outside Alquist-Priolo Special Studies Zone but within Zone C (moderate liquefaction potential). Recommend geotechnical boring program.
ToolRouter search_earthquakes
DateMagnitudeLocation
Aug 2022M4.2Orinda fault · 18 mi SW
Mar 2020M3.8Hayward fault · 22 mi W
Nov 2019M3.5Midlands fault · 8 mi S
23 events found · Zone C liquefaction potential · outside Alquist-Priolo zone
Client development for EHS and sustainability programs
Identify EHS managers, sustainability officers, and environmental compliance leads at industrial companies likely to need environmental consulting services. Build targeted prospect lists for business development.
Find Director of Environmental Compliance, VP of EHS, and Chief Sustainability Officer contacts at US chemical and petrochemical manufacturers with facilities in the Gulf Coast region.
Found 41 contacts at 28 companies. 12 have open EHS job postings (strong signal of active compliance activity). 7 are publicly listed companies with ESG disclosure obligations. Top priority: 5 companies with recent OSHA or EPA notices of violation — highest urgency for remediation consulting.
ToolRouter find_leads
NameTitleCompany
Patricia NguyenVP Environmental Health & SafetyPioneer Natural Resources
Carlos ReyesChief Sustainability OfficerDiamondback Energy
Angela DavisDirector EHSCoterra Energy
James MartinezVP EHS & RegulatoryChord Energy
41 contacts · 28 companies · 12 with open EHS postings
Ready-to-use prompts
Regulatory compliance research
Research federal and state environmental compliance requirements for a new wastewater treatment facility in Texas. Include Clean Water Act permits (NPDES), Texas Commission on Environmental Quality (TCEQ) requirements, and discharge limits for industrial effluent.
Air quality assessment
Get current and historical (30-day average) air quality data for industrial zip code 77001 in Houston, TX. Include PM2.5, PM10, ozone, NOx, and SO2 levels. Flag any exceedances of NAAQS standards.
Solar feasibility study
Estimate solar energy generation potential for a 25-acre brownfield site at coordinates 39.7392°N, 104.9903°W (Denver, CO). Include annual irradiance, estimated capacity, generation output, and carbon offset versus Colorado grid average.
Site satellite imagery
Get satellite imagery for coordinates 41.8781°N, 87.6298°W (Chicago). I need sub-meter resolution imagery to document current land use, identify surface water features, and map vegetation for an environmental baseline report.
Seismic hazard research
Search for all earthquakes magnitude 3.0 or greater within 100 miles of Memphis, Tennessee in the last 20 years. Include magnitude, depth, and distance from the New Madrid Seismic Zone fault system.
Environmental law research
Research the legal requirements for CERCLA liability and responsible party designation in brownfield contamination cases. Include recent case law on successor liability and bona fide prospective purchaser defenses.
Prospect EHS leaders
Find VP of Environmental Health and Safety and Chief Sustainability Officers at US manufacturing companies in the automotive sector with more than 2000 employees. Include their company location and any recent environmental compliance news.
Climate risk data
Get weather and climate data for a coastal industrial site in Miami, FL. Include annual rainfall, storm frequency, sea level rise projections, and historical hurricane track data for flood risk assessment purposes.
Tools to power your best work
Weather ForecastWeather, air quality & UV anywhere
Academic ResearchSearch papers, authors, citations
Content RepurposerTurn any content into posts, scripts, and articles
Earthquake MonitorLive & historical earthquake data
Deep ResearchAI research reports with citations
Company LookupCompany data for UK, US & EU
Air QualityAQI, pollen & health guidance
Satellite ImagerySatellite photos of any location on Earth
165+ tools.
One conversation.
Everything environmental consultants need from AI, connected to the assistant you already use. No extra apps, no switching tabs.
Phase I ESA site assessment package
Compile the data layers needed for a Phase I Environmental Site Assessment: imagery, air quality baseline, seismic context, and regulatory review.
Renewable energy project environmental review
Support the environmental review process for a solar or wind project: feasibility data, regulatory requirements, and site conditions documentation.
Industrial client development campaign
Identify environmental and sustainability leaders at industrial companies, research their compliance context, and prioritize outreach.
Frequently Asked Questions
How accurate is the air quality data for specific sites?
Air Quality pulls from monitoring stations and real-time sensor networks. Accuracy depends on proximity to the nearest monitoring station — urban and industrial areas have denser coverage. For regulatory permit applications, always verify against the official EPA AQS database and applicable state monitoring data.
Can satellite imagery be used in formal environmental reports?
Satellite Imagery retrieves georeferenced imagery from multiple providers including Planet, Maxar, and Airbus. The imagery can be used as a supporting exhibit in Phase I ESAs and baseline condition reports. Always document the imagery source, acquisition date, and resolution in your report appendix.
How does the energy data tool support environmental impact assessments?
Energy Data provides solar irradiance estimates and electricity price data. For environmental assessments, the carbon offset calculations (comparing renewable generation against grid emissions factors) support greenhouse gas mitigation analyses. Site-specific generation modeling uses NASA POWER solar database inputs.
Can these tools help with climate risk and sea level rise assessments?
Weather Forecast provides historical and current climate data. Deep Research can synthesize IPCC projections, NOAA sea level rise data, and site-specific climate risk assessments from peer-reviewed sources. Satellite Imagery can document coastal and floodplain conditions.
How do I research state-specific environmental regulations quickly?
Deep Research synthesizes regulatory content from EPA, state environmental agency websites, and legal databases. For state-specific requirements, specify the state and regulated activity in your prompt. For recent regulatory changes, include a date range to ensure currency of the information.
Give your AI superpowers.
Get started for free
Works in Chat, Cowork and Code